Our heavy duty trash pump with medium head for pumping water with solids. These trash pumps are designed for heavy duty and are suitable for construction and industrial work. With rapid self priming capabilities and has been made to transfer high volumes of dirty water with the help of solid and durable cast iron impeller and internal casing. The unique quick release system allow for rapid and efficient removal of debris from a clogged impeller. Compact and complete with Honda petrol or a choice of Yanmar, Hatz or Subaru diesel engines that are easily maintained for a long service life. Available in two sizes of 80 and 100mm.
Performance curves are based on a kinematic viscosity value of 1mm²/s and a density of 1000 Kg/m³ at 20ºC.
- Flow rates up to 137m³/h.
- Heads up to 30m.
- Suction heads up to 8m.
- Suitable for pumping fluids with solids up to 30mm in size.
- Maximum fluid temperature: +35ºC.
- Maximum ambient temperature: +40ºC.
- Maximum allowable pressure in casing: 6 Bar.
- Rotational speed: Nominal speed 3000rpm, maximum speed 3600rpm.
- Complete with sturdy roll cage for protection and ease of handling.
Petrol: 5.5hp to 13hp OHV horizontal shaft Honda petrol engines with oil alert.
Diesel:5.5hp to 12.6hp Subaru/Yanmar/Hatz desel engines with oil alert. Datasheet Download
The pump is to be installed in a horizontal position for both fixed and portable plants. These self priming pumps require water in the pump case only for the initial pumping operation. No water is necessary for subsequent pumping when the casing contains water. For maximum efficiency make the piping as short and straight as possible. Make sure that clean water is pumped through the pump system before storage - this will ensure a trouble free start-up the next time your pump is used.
Caution: These pumps should never be run dry! - always make certain that the casing contains water.