Large volume pumps with medium head available in three popular sizes. These water movers are designed for heavy duty and are suitable for construction and industrial work. With rapid self priming capabilities and made to transfer high volumes of water with the help of solid and durable cast iron impeller and internal casing. Compact and complete with a variety of diesel or petrol drive units that are easily maintained for a long service life. Enclosed in a sturdy roll cage for protection and ease of handling.
Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.
- Flow rates up to 73m3/h.
- Heads up to 42m.
- Suction heads up to 8m.
- Fluids must be clean and free from suspended abrasive particles.
- Maximum fluid temperature: +35ºC.
- Maximum ambient temperature: +40ºC.
- Maximum allowable pressure in casing: 6 Bar.
- Rotational speed: Nominal speed 3000rpm, maximum speed 3600rpm.
- Electronic start units available upon request.
- Available in 3 different flow / head configurations.
Engine options available are in diesel and petrol from the following manufacturers.
Honda petrol: 5.5 to 9hp OHV horizontal shaft petrol engines with electronic ignition and oil alert.
Subaru petrol: 6 to 9hp OHV horizontal shaft petrol engines, with electronic ignition and oil alert.
Subaru diesel: 5.5 to 8.5hp air-cooled direct fuel injected diesel engines, with low vibration levels.
The pump is to be installed in a horizontal position for both fixed and portable plants. These self priming pumps require water in the pump case only for the initial pumping operation. No water is necessary for subsequent pumping when the casing contains water For maximum efficiency make the piping as short and straight as possible.
Caution: These pumps should never be run dry!