Pump application:
The Quax range of hydraulic drive submersible water pumps are manufactured in the UK and are great performers.
All pumps are available with a suitable power pack if required. All power packs come complete with wheels and central lifting frame and forklift feet. As standard, the power packs are fitted with a silent pack Hatz diesel engine. Fitted on a 145 litre diesel fuel tank and a hydraulic reservoir.
These pumps are ideal for draining tanks and ponds which have liquids with suspended solids.
The 100mm Quax pump is fitted with a screw impeller for larger solids handling. Both models are also available with a aluminium or a steel casing.
Performance data:
Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.
- Flow rates up to 39 L/sec.
- Heads up to 45m.
- Fluids must be clean and free from suspended abrasive particles and solids.
- Maximum fluid temperature: +40ºC.
- Solids handling to 70mm.
Hydraulics:
The driving motor has a high pressure motor seal with stainless steel wear plates.
- Power pack required 35hp
- Uses biodegradable oils.
- Hydraulic flow 60 L/min
- Hydraulic working pressure 175bar.
- Maximum hydraulic pressure 240bar
Installation:
The pump is to be installed in an upright position for both fixed and portable plants. Do not run your pump dry. To prevent damage, use a rope or chain to position and retrieve your pump - never use the hydraulic hose for this purpose.
Datasheet Download
