6 inch heavy duty watermover

Product Code : ENG-18

Pump Application:

Our largest water transfer pumps which delivering up to an amazing 50 l/sec.   These water movers are designed for heavy duty and are suitable for serious construction and industrial work.    With self priming capabilities and made to transfer high volumes of water with the help of solid and durable marine grade casing and internals and a cast iron impeller.    Compact and available with either a diesel or petrol drive unit that is easily maintained for a long service life.    Enclosed in a sturdy heavy duty roll cage for protection and ease of handling.

 

Performance data:

Performance curves are based on a kinematic viscosity value of 1mm²/s and a density of 1000Kg/m³ at 20ºC.

-          flow rates up to 174m³/h

-          Heads up to 20m

-          Suction heads up to 7.4m

-          With large open impellers capable of pumping some solids in suspension.

-          Maximum fluid temperature: +35ºC

-          Maximum ambient temperature: +40ºC

-          Maximum allowable pressure in casing: 6 Bar

-          Rotational speed: Nominal speed 3000rpm, maximum speed 3600rpm

-          Electronic start units are supplied as standard

 

Engine:

Engine options available are in diesel and petrol from the following manufacturers.

Honda petrol: 13hp OHV horizontal shaft petrol engines with electronic ignition and oil alert

Subaru diesel: 8.5hp air-cooled direct fuel injected diesel engines, with low vibration levels.

 

Installation:

The pump is to be installed in a horizontal position for both fixed and portable plants.   These self priming pumps require water in the pump case only for the initial pumping operation.      No water is necessary for subsequent pumping when the casing contains water. For maximum efficiency make the piping as short and straight as possible.

 

 

Top