Chemical Drum Pump

Chemical Drum Pump

Product Code : CEN - 15

Pump application:

These Italian Carbuset pumps are ideal for use across a range of chemical transfer applications including in the agriculture and general industries.



These AP40 centrifugal electric pumps are driven by a double-insulated motor. This characteristic enables the operator to work in complete safety also in the case of short circuiting. Other safety devices include a built-in antisiphon system which, if the supply tube or the dispenser gun is accidentally damaged, stops the liquid contained in the drum from spilling out. The pump is made out of a plastic body with high mechanical properties, NBR seals and stainless steel vanes and fasteners. These characteristics allow liquid to be transferred without any risk of corrosion. The pump comes in kit form which includes the supply and suction tubes, the filter, the handgrip and anything else that is needed for quick assembly and use. The chemical pump is suitable for transferring a large range of chemicals including: Diesel oils, Calcium Bisulphite, Calcium Nitrate, Carbon Disulphide, Copper Sulphate, Kerosene, Naptha, Potassium

Hydroxide (diluted - cold), Sodium Bicarbonate and Sodium Chloride.



This pump is not explosion proof and should not be used for petrol and solvents. By pumping such liquids you may create a serious explosion fire hazards and invalidate the warrantees.



A 240v option is also available on application.

A "diesel" pump version is available which is suitable for the following substances:

Water, mineral and synthetic oil, engine oil, emulsified water, glycols (anti-freeze liquid), dielectric liquid (paraffin), diesel fuel and heating naphtha.

Please refer to Tech data sheet CEN-14 for further details.


Performance data:

Performance curves are based on a kinematic viscosity value of 1mm²/s and a density of 1000 Kg/m³ at 20ºC.

- Pump body screw thread: M64 (2") to fit 44 gallon drum.

- Flow rates up to 25 L/min.

- Fluids must be clean and free from suspended abrasive particles.

- Maximum fluid temperature: +35ºC.

- Weight: 3.5kg.

- Absorbed power: 110W

- Packing dimensions: 400 x 400 x 150mm.

- Pump body screw thread: M64 (2") to fit 44 gallon drum.

- Normal discharge head: 1m.

- Maximum discharge head: 4m for short periods only.

- Internal diameter of hose: 17.5mm.



The pump is ideal for the quick and easy decanting of chemicals from drums, containers and tanks. The pump must never be used when empty. The pump only works in a vertical position. Before connecting the pump to the power supply, ensure that the voltage complies with the limitations indicated. Keep the fuelling lever pressed. Start the pump by repeatedly activating the trigger located on the pump body until the liquid starts flowing from the fuelling gun (repeat this process each time the motor is started or in the case of power failure). Start the motor using the switch and proceed to fuelling. When finished, release the fuelling lever and switch off the motor.

Datasheet Download