Large volume pumps available in two sizes, both with medium heads manufactured with a corrosion proof plastic body. These watermovers are designed for heavy duty and are suitable for construction and industrial work. With rapid self priming capabilities and made to transfer high volumes of water with the help of a solid and durable impeller and internal casing. Compact and complete with a variety of petrol and diesel drives that are easily maintained for a long service life. Optionally enclosed in a sturdy roll cage for protection and ease of handling.
Performance curves are based on a kinematic viscosity value of 1mm²/s and a density of 1000Kg/m³ at 20ºC.
- Flow rates up to 83m³/h.
- Heads up to 38m.
- Suction heads up to 8m.
- Fluid must be clean and free from suspended abrasive particles.
- Maximum fluid temperature: +35ºC.
- Maximum ambient temperature: +40ºC.
- Maximum allowable pressure in casing: 6 Bar.
- Rotational speed: Norminal speed 3000rpm, maximum speed 3600rpm
- Available with either 50 or 80mm inlet and discharge ports.
- Available with or without a roll cage.
Engine options available are in diesel and petrol from the following manufactures.
Honda Petrol: 6.5hp OHV horizontal shaft petrol engines with electronic ignition and oil alert.
Subaru Petrol: 7hp OHV horizontal shaft petrol engines, with electronic ignition and oil alert.
Subaru Diesel: 5.5hp air-cooled direct fuel injected diesel engines, with low vibration levels.
The pump is to be installed in a horizontal position for both fixed and portable plants. These self priming pumps require water in the pump case only for the initial pumping operation. No water is necessary for subsequent pumping when the casing contains water For maximum efficiency make the piping as short and straight as possible.
Caution: These pumps should never be run dry!