Magnetic drive centrifugal pumps Pump Application:          Magnetically driven pumps handle products where leak free transfer is a must, where high reliability is paramount and the purity of the pumped medium must be maintained.      The operation is identical to any centrifugal pump except that the need for a shaft seal is eliminated.                        Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 520 Litres per minute.            - Heads up to 31m.            - Maximum suction head up to 7m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +85ºC.            - Minimum fluid temperature: -20ºC.            - Maximum ambient temperature: +40ºC.                     - Rotational speed: 2900rpm.           Motor:          The driving motor is an asynchronous, closed squirrel cage type, with external ventilation.                      - With in-built thermo-amperometric protection and capacitor.             - Class of insulation: F - service: S1.            - Degree of protection: IP54 and IP55.                              Installation:          The pump is to be installed in a fixed horizontal.    The motor must always be placed above the pump.                    

Principal Applications For applications requiring safe, leak-free, continuous flow of aggressive chemicals, acids, alkalis, sterile and chilled fluids.   Wetted Materials Standard EPDM O Ring, optional Nitrile or Viton PP encapsulated magnet, PVDF optional PP pump housing, PPS optional PPS spindle housing Alumina ceramic spindle & thrust washers   Features Manufactured in chemical resistant thermo-plastics – entirely non-metallic Magnetic couplings provide an energy efficient thermal shield, minimising heat transfer to the pumped fluids IP55 standard motor housing                  Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 117 Litres per minute.            - Heads up to 7.2m.            - Maximum suction head up to 7m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +85ºC.            - Minimum fluid temperature: -20ºC.            - Maximum ambient temperature: +40ºC.                     - Rotational speed: 2900rpm.                                        

Principal Applications For applications requiring safe, leak-free, continuous flow of aggressive chemicals, acids, alkalis, sterile and chilled fluids.   Wetted Materials Standard EPDM O Ring, optional Viton PP encapsulated magnet, PVDF optional PP pump housing, PPS optional PPS spindle housing Alumina ceramic spindle & thrust washers   Features Manufactured in chemical resistant thermo-plastics – entirely non-metallic Magnetic couplings provide an energy efficient thermal shield, minimising heat transfer to the pumped fluids IP55 standard motor housing EEXD and high SG versions available                  Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 117 Litres per minute.            - Heads up to 7.2m.            - Maximum suction head up to 7m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +85ºC.            - Minimum fluid temperature: -20ºC.            - Maximum ambient temperature: +40ºC.                     - Rotational speed: 2900rpm.                                        

Principal Applications For applications requiring safe, leak-free, continuous flow of aggressive chemicals, acids, alkalis, sterile and chilled fluids.   Wetted Materials Standard EPDM O Ring, optional Viton PP encapsulated magnet, PVDF optional PP pump housing, PPS optional PPS spindle housing Alumina ceramic spindle & thrust washers   Features Manufactured in chemical resistant thermo-plastics – entirely non-metallic Magnetic couplings provide an energy efficient thermal shield, minimising heat transfer to the pumped fluids IP55 standard motor housing EEXD and high SG versions available                  Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 158 Litres per minute.            - Heads up to 8.8m.            - Maximum suction head up to 7m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +85ºC.            - Minimum fluid temperature: -20ºC.            - Maximum ambient temperature: +40ºC.                     - Rotational speed: 2900rpm.                                        

Principal Applications For applications requiring safe, leak-free, continuous flow of aggressive chemicals, acids, alkalis, sterile and chilled fluids.   Wetted Materials Standard EPDM O Ring, optional Viton PP encapsulated magnet, PVDF optional PP pump housing, PVDF optional PPS spindle housing Alumina ceramic spindle & thrust washers   Features Manufactured in chemical resistant thermo-plastics – entirely non-metallic Magnetic couplings provide an energy efficient thermal shield, minimising heat transfer to the pumped fluids IP55 standard motor housing EEXD and high SG versions available                  Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 200 Litres per minute.            - Heads up to 10.5m.            - Maximum suction head up to 7m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +85ºC.            - Minimum fluid temperature: -20ºC.            - Maximum ambient temperature: +40ºC.                     - Rotational speed: 2900rpm.