Poseidon pumps complete with engine

Showing 5 products

The Poseidon 100x65-250A-MDP6 series manual prime pumps

38 Litres/Sec - 70m

Poseidon Dry run, Manual prime  centrifugal pumps Pump Application:          These are diesel driven single stage centrifugal pumps fitted with the Poseidon Dry run and the 6cfm manual priming systems.  Complete with a heavy duty diesel engine - a variety of engine brands are available upon request.   A heavy duty cast iron body that contains a cast iron, bronze or stainless steel  impeller attached to a heavy duty stainless steel shaft.    These quality pumps, have been designed for use in construction, industrial and mining dewatering applications.   Because of the high quality of the materials and due to the accurate manufacturing processes used, these pumps are extremely reliable, quiet and long lasting.    These pumps are ideal for pressurisation, transfer of fluids, water supply, irrigation, dewatering and for all those applications that need medium to high heads and flow rates.                    Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 38 liters/sec.            - Heads up to 70m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +80ºC.            - Maximum ambient temperature: +60ºC.            - Maximum allowable pressure in casing: 18 Bar.            - Rotational speed: variable speed up to 3500rpm.  - Heavy duty cast iron construction with stainless steel shaft, standard with cast iron impeller also available with bronze or stainless steel impellers.            - All pumps are fitted with a low maintenance Sic / Sic / Viton mechanical seal,               other seals available for higher temperature ratings and more aggressive liquids.                         Installation:        The pump can be fitted via a SAE standard bell housing / flywheel directly to a diesel engine.   The pump / pump set, is to be installed and operated in a horizontal position.  

The Poseidon 125x100-250A-MDP6 series manual prime pumps

72 Litres/Sec - 64m

Poseidon Dry run, Manual prime  centrifugal pumps Pump Application:          These are diesel driven single stage centrifugal pumps fitted with the Poseidon Dry run and the 6cfm manual priming systems.  Complete with a heavy duty diesel engine - a variety of engine brands are available upon request.   A heavy duty cast iron body that contains a cast iron, bronze or stainless steel  impeller attached to a heavy duty stainless steel shaft.    These quality pumps, have been designed for use in construction, industrial and mining dewatering applications.   Because of the high quality of the materials and due to the accurate manufacturing processes used, these pumps are extremely reliable, quiet and long lasting.    These pumps are ideal for pressurisation, transfer of fluids, water supply, irrigation, dewatering and for all those applications that need medium to high heads and flow rates.                    Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 72 liters/sec.            - Heads up to 64m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +80ºC.            - Maximum ambient temperature: +60ºC.            - Maximum allowable pressure in casing: 18 Bar.            - Rotational speed: variable speed up to 3500rpm.  - Heavy duty cast iron construction with stainless steel shaft, standard with cast iron impeller also available with bronze or stainless steel impellers.            - All pumps are fitted with a low maintenance Sic / Sic / Viton mechanical seal,               other seals available for higher temperature ratings and more aggressive liquids.                         Installation:        The pump can be fitted via a SAE standard bell housing / flywheel directly to a diesel engine.   The pump / pump set, is to be installed and operated in a horizontal position.  

The Poseidon 150x125-250A-MDP6 series manual prime pumps

127 Litres/Sec - 61.5m

Poseidon Dry run, Manual prime  centrifugal pumps Pump Application:          These are diesel driven single stage centrifugal pumps fitted with the Poseidon Dry run and the 6cfm manual priming systems.  Complete with a heavy duty diesel engine - a variety of engine brands are available upon request.   A heavy duty cast iron body that contains a cast iron, bronze or stainless steel  impeller attached to a heavy duty stainless steel shaft.    These quality pumps, have been designed for use in construction, industrial and mining dewatering applications.   Because of the high quality of the materials and due to the accurate manufacturing processes used, these pumps are extremely reliable, quiet and long lasting.    These pumps are ideal for pressurisation, transfer of fluids, water supply, irrigation, dewatering and for all those applications that need medium to high heads and flow rates.                    Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 127 liters/sec.            - Heads up to 61.5m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +80ºC.            - Maximum ambient temperature: +60ºC.            - Maximum allowable pressure in casing: 18 Bar.            - Rotational speed: variable speed up to 3500rpm.  - Heavy duty cast iron construction with stainless steel shaft, standard with cast iron impeller also available with bronze or stainless steel impellers.            - All pumps are fitted with a low maintenance Sic / Sic / Viton mechanical seal,               other seals available for higher temperature ratings and more aggressive liquids.                         Installation:        The pump can be fitted via a SAE standard bell housing / flywheel directly to a diesel engine.   The pump / pump set, is to be installed and operated in a horizontal position.  

The Poseidon 65x40-250A-MDP6 series manual prime pumps

18 Litres/Sec - 108m

Poseidon Dry run, Manual prime  centrifugal pumps Pump Application:          These are diesel driven single stage centrifugal pumps fitted with the Poseidon Dry run and the 6cfm manual priming systems.  Complete with a heavy duty diesel engine - a variety of engine brands are available upon request.   A heavy duty cast iron body that contains a cast iron, bronze or stainless steel  impeller attached to a heavy duty stainless steel shaft.    These quality pumps, have been designed for use in construction, industrial and mining dewatering applications.   Because of the high quality of the materials and due to the accurate manufacturing processes used, these pumps are extremely reliable, quiet and long lasting.    These pumps are ideal for pressurisation, transfer of fluids, water supply, irrigation, dewatering and for all those applications that need medium to high heads and flow rates.                    Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 18 liters/sec.            - Heads up to 108m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +80ºC.            - Maximum ambient temperature: +60ºC.            - Maximum allowable pressure in casing: 18 Bar.            - Rotational speed: variable speed up to 3500rpm.  - Heavy duty cast iron construction with stainless steel shaft, standard with cast iron impeller also available with bronze or stainless steel impellers.            - All pumps are fitted with a low maintenance Sic / Sic / Viton mechanical seal,               other seals available for higher temperature ratings and more aggressive liquids.                         Installation:        The pump can be fitted via a SAE standard bell housing / flywheel directly to a diesel engine.   The pump / pump set, is to be installed and operated in a horizontal position.  

The Poseidon 80x50-250A-MDP6 series manual prime pumps

27.7 Litres/Sec - 84m

Poseidon Dry run, Manual prime  centrifugal pumps Pump Application:          These are diesel driven single stage centrifugal pumps fitted with the Poseidon Dry run and the 6cfm manual priming systems.  Complete with a heavy duty diesel engine - a variety of engine brands are available upon request.   A heavy duty cast iron body that contains a cast iron, bronze or stainless steel  impeller attached to a heavy duty stainless steel shaft.    These quality pumps, have been designed for use in construction, industrial and mining dewatering applications.   Because of the high quality of the materials and due to the accurate manufacturing processes used, these pumps are extremely reliable, quiet and long lasting.    These pumps are ideal for pressurisation, transfer of fluids, water supply, irrigation, dewatering and for all those applications that need medium to high heads and flow rates.                    Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 27.7 liters/sec.            - Heads up to 84m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +80ºC.            - Maximum ambient temperature: +60ºC.            - Maximum allowable pressure in casing: 18 Bar.            - Rotational speed: variable speed up to 3500rpm.  - Heavy duty cast iron construction with stainless steel shaft, standard with cast iron impeller also available with bronze or stainless steel impellers.            - All pumps are fitted with a low maintenance Sic / Sic / Viton mechanical seal,               other seals available for higher temperature ratings and more aggressive liquids.                         Installation:        The pump can be fitted via a SAE standard bell housing / flywheel directly to a diesel engine.   The pump / pump set, is to be installed and operated in a horizontal position.  

Showing 1–5 of 5 results

Top