200 series Pumps

The 200 series of ISO2858 standard heavy duty industrial centrifugal pumps.

Available as close coupled electric  pumps and also bare shaft pumps.

Showing 5 products

ISO2858 standard 100x65-200

53 Litres/Sec - 107M

ISO Standard centrifugal pumps Pump Application:          These are bare shaft and motor driven single stage centrifugal pumps designed and manufactured to ISO Standard 2858.   A heavy duty cast iron body that contains a cast iron or bronze  impeller attached to a stainless steel shaft.    These quality pumps, have been designed for use in commercial, industrial and farming applications.   Because of the high quality of the materials and due to the accurate manufacturing processes used, these pumps are extremely reliable, quiet and long lasting.    These pumps are ideal for pressurisation, transfer of fluids, water supply, irrigation, mechanical services and for all those applications that need medium heads and flow rates.                    Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 53 liters/sec.            - Heads up to 107m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +45ºC.            - Maximum ambient temperature: +40ºC.            - Maximum allowable pressure in casing: 16 Bar.            - Rotational speed: Standard 1450 and 2900rpm configurations and variable speed options.            - Heavy duty cast iron construction with stainless steel shaft and fasteners,               available with cast iron or zinc free bronze impellers.            - All pumps are fitted with a low maintenance Carbon Ceramic mechanical seal,               other seals available for higher temperature ratings and more aggressive liquids.           Motor:          Monarch - Three phase Foot and Flange Induction Motors are a range of high quality, Totally Enclosed Fan Cooled (TEFC), squirrel cage induction motors.                    Designed, manufactured and tested to the latest International and Australian standards.  IEC34, IEC72, AS1359 and QA to ISO9001.            - Protection: Frame sizes D160 and larger are fitted with PTC thermistor protection.             - Degree of protection: IP55.            - Class of insulation: F - service: S1.                    Installation:        The pump is to be installed in a fixed horizontal or vertical position.The motor must always be placed above the pump..      

ISO2858 standard 125x100-200

83.5 Litres/Sec - 70.5m

ISO Standard centrifugal pumps Pump Application:          These are bare shaft and motor driven single stage centrifugal pumps designed and manufactured to ISO Standard 2858.   A heavy duty cast iron body that contains a cast iron or bronze  impeller attached to a stainless steel shaft.    These quality pumps, have been designed for use in commercial, industrial and farming applications.   Because of the high quality of the materials and due to the accurate manufacturing processes used, these pumps are extremely reliable, quiet and long lasting.    These pumps are ideal for pressurisation, transfer of fluids, water supply, irrigation, mechanical services and for all those applications that need medium heads and flow rates.                    Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 83.5 liters/sec.            - Heads up to 70.5m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +45ºC.            - Maximum ambient temperature: +40ºC.            - Maximum allowable pressure in casing: 16 Bar.            - Rotational speed: Standard 1450 and 2900rpm configurations and variable speed options.            - Heavy duty cast iron construction with stainless steel shaft and fasteners,               available with cast iron or zinc free bronze impellers.            - All pumps are fitted with a low maintenance Carbon Ceramic mechanical seal,               other seals available for higher temperature ratings and more aggressive liquids.           Motor:          Monarch - Three phase Foot and Flange Induction Motors are a range of high quality, Totally Enclosed Fan Cooled (TEFC), squirrel cage induction motors.                    Designed, manufactured and tested to the latest International and Australian standards.  IEC34, IEC72, AS1359 and QA to ISO9001.            - Protection: Frame sizes D160 and larger are fitted with PTC thermistor protection.             - Degree of protection: IP55.            - Class of insulation: F - service: S1.                    Installation:        The pump is to be installed in a fixed horizontal or vertical position.The motor must always be placed above the pump..      

ISO2858 standard 50x32-200

12.8 Litres/Sec - 109M

ISO Standard centrifugal pumps Pump Application:          These are bare shaft and motor driven single stage centrifugal pumps designed and manufactured to ISO Standard 2858.   A heavy duty cast iron body that contains a cast iron or bronze  impeller attached to a stainless steel shaft.    These quality pumps, have been designed for use in commercial, industrial and farming applications.   Because of the high quality of the materials and due to the accurate manufacturing processes used, these pumps are extremely reliable, quiet and long lasting.    These pumps are ideal for pressurisation, transfer of fluids, water supply, irrigation, mechanical services and for all those applications that need medium heads and flow rates.                    Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 12.8 liters/sec.            - Heads up to 109m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +45ºC.            - Maximum ambient temperature: +40ºC.            - Maximum allowable pressure in casing: 16 Bar.            - Rotational speed: Standard 1450 and 2900rpm configurations and variable speed options.            - Heavy duty cast iron construction with stainless steel shaft and fasteners,               available with cast iron or zinc free bronze impellers.            - All pumps are fitted with a low maintenance Carbon Ceramic mechanical seal,               other seals available for higher temperature ratings and more aggressive liquids.           Motor:          Monarch - Three phase Foot and Flange Induction Motors are a range of high quality, Totally Enclosed Fan Cooled (TEFC), squirrel cage induction motors.                    Designed, manufactured and tested to the latest International and Australian standards.  IEC34, IEC72, AS1359 and QA to ISO9001.            - Protection: Frame sizes D160 and larger are fitted with PTC thermistor protection.             - Degree of protection: IP55.            - Class of insulation: F - service: S1.                    Installation:        The pump is to be installed in a fixed horizontal or vertical position.The motor must always be placed above the pump..      

ISO2858 standard 65x40-200

21.2 Litres/Sec - 114M

ISO Standard centrifugal pumps Pump Application:          These are bare shaft and motor driven single stage centrifugal pumps designed and manufactured to ISO Standard 2858.   A heavy duty cast iron body that contains a cast iron or bronze  impeller attached to a stainless steel shaft.    These quality pumps, have been designed for use in commercial, industrial and farming applications.   Because of the high quality of the materials and due to the accurate manufacturing processes used, these pumps are extremely reliable, quiet and long lasting.    These pumps are ideal for pressurisation, transfer of fluids, water supply, irrigation, mechanical services and for all those applications that need medium heads and flow rates.                    Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 21.2 liters/sec.            - Heads up to 114m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +45ºC.            - Maximum ambient temperature: +40ºC.            - Maximum allowable pressure in casing: 16 Bar.            - Rotational speed: Standard 1450 and 2900rpm configurations and variable speed options.            - Heavy duty cast iron construction with stainless steel shaft and fasteners,               available with cast iron or zinc free bronze impellers.            - All pumps are fitted with a low maintenance Carbon Ceramic mechanical seal,               other seals available for higher temperature ratings and more aggressive liquids.           Motor:          Monarch - Three phase Foot and Flange Induction Motors are a range of high quality, Totally Enclosed Fan Cooled (TEFC), squirrel cage induction motors.                    Designed, manufactured and tested to the latest International and Australian standards.  IEC34, IEC72, AS1359 and QA to ISO9001.            - Protection: Frame sizes D160 and larger are fitted with PTC thermistor protection.             - Degree of protection: IP55.            - Class of insulation: F - service: S1.                    Installation:        The pump is to be installed in a fixed horizontal or vertical position.The motor must always be placed above the pump..      

ISO2858 standard 80x50-200

34.5 Litres/Sec - 114M

ISO Standard centrifugal pumps Pump Application:          These are bare shaft and motor driven single stage centrifugal pumps designed and manufactured to ISO Standard 2858.   A heavy duty cast iron body that contains a cast iron or bronze  impeller attached to a stainless steel shaft.    These quality pumps, have been designed for use in commercial, industrial and farming applications.   Because of the high quality of the materials and due to the accurate manufacturing processes used, these pumps are extremely reliable, quiet and long lasting.    These pumps are ideal for pressurisation, transfer of fluids, water supply, irrigation, mechanical services and for all those applications that need medium heads and flow rates.                    Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 34.5 liters/sec.            - Heads up to 114m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +45ºC.            - Maximum ambient temperature: +40ºC.            - Maximum allowable pressure in casing: 16 Bar.            - Rotational speed: Standard 1450 and 2900rpm configurations and variable speed options.            - Heavy duty cast iron construction with stainless steel shaft and fasteners,               available with cast iron or zinc free bronze impellers.            - All pumps are fitted with a low maintenance Carbon Ceramic mechanical seal,               other seals available for higher temperature ratings and more aggressive liquids.           Motor:          Monarch - Three phase Foot and Flange Induction Motors are a range of high quality, Totally Enclosed Fan Cooled (TEFC), squirrel cage induction motors.                    Designed, manufactured and tested to the latest International and Australian standards.  IEC34, IEC72, AS1359 and QA to ISO9001.            - Protection: Frame sizes D160 and larger are fitted with PTC thermistor protection.             - Degree of protection: IP55.            - Class of insulation: F - service: S1.                    Installation:        The pump is to be installed in a fixed horizontal or vertical position.The motor must always be placed above the pump..      

Showing 1–5 of 5 results

Top