Submersible high pressure sewage pumps

A range of high pressure sewage pumps especially suitable for liquids containing abrasive substances requiring higher heads.

Showing 4 products

APN and APP high pressure sewage pumps

A range of APN and APP high pressure sewage pumps

Pump application:          This range of heavy duty cast iron high pressure submersible pumps are suitable for both commercial and industrial use.    These pumps can be used for pumping polluted water containing clear or dirty water with small solids including sandy or abrasive liquids.     Easy to install with the special coupling device.  Complete with 2 mechanical seals contained in an inspectable oil chamber with oil sensor and includes heavy duty ball bearing motor with inbuilt overloads.                    Performance data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 40m3/h.            - Heads up to 52.5m.            - Fluids can contain small suspended abrasive particles and solids.            - Maximum fluid temperature: +40ºC.            - PH of fluid: 6 to 10.            - Rotational speed: 2900rpm.            - Maximum immersion depth: 20m                    Motor:          The driving motor is an asynchronous, closed squirrel cage type, designed for continuous duty.                      - With in-built thermo-amperometric protection.             - With in-built oil sensor to indicate failure of one mechanical seal               before failure of second mechanical seal.             - Class of insulation: H.            - Degree of protection: IP68.            - Maximum number of start-ups: 20 per hour.            - Cable length: 10m.                              Installation:          The pump is to be installed in an upright position for both fixed and portable plants.  Do not run your pump dry.    To prevent damage, use a rope or chain to position and retrieve your pump - never use the electric cable for this purpose.  For a typical installation see page 4 of 4 of this document.       Caution 1:           Don't use this pump for recirculating or filtering pools, spas, etc.   While these pumps are built to a high safety standard, they are not approved for installations where people will be in the water while they are operating.                      Caution 2:           While these pumps are built to a high quality standard, they are also capable of pumping continuously sandy and abrasive liquids. Such liquids will reduce the operating life of any pump including these APN and APP pumps.           

APS and APE high pressure sewage pumps

A range of APS and APE high pressure sewage pumps

Pump application:          This range of heavy duty cast iron submersible high head pumps are suitable for both domestic  and commercial use.    These pumps can be used for pumping polluted water containing small solids including sandy or abrasive liquids.    Fitted with an  anti clogging device that reduces pump blockages, maintaining pump efficiencies.   Easy to install with the special coupling device.  Mechanical seal made of wear-proof silicon carbide complete with a sealing ring.  It includes heavy duty ball bearing motor with inbuilt overloads.                    Performance data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 32m3/h.            - Heads up to 29m.            - Maximum fluid temperature: +40ºC.            - PH of fluid: 6 to 10.            - Rotational speed: 2900rpm.            - Maximum immersion depth: 20m            - Strainer size:  10 x 20 mm slots in strainer.                     Motor:          The driving motor is an asynchronous, closed squirrel cage type, designed for continuous duty.                      - With in-built thermo-amperometric protection.             - Class of insulation: F.            - Degree of protection: IP68.            - Maximum number of start-ups: 20 per hour.            - Cable length: 10m.                    Installation:          The pump is to be installed in an upright position for both fixed and portable plants.  Do not run your pump dry.    To prevent damage, use a rope or chain to position and retrieve your pump - never use the electric cable for this purpose.  For a typical installation see page 4 of 4 of this document.                    Caution 1:           Don't use this pump for recirculating or filtering pools, spas, etc.   While these pumps are built to a high safety standard, they are not approved for installations where people will be in the water while they are operating.                          Caution 2:           While these pumps are built to a high quality standard, they are also capable of pumping continuously sandy and abrasive liquids. Such liquids will reduce the operating life of any pump including these DRP pumps.           

MAN high pressure sewage pumps

A range of MAN high pressure sewage pumps

Pump application:          This range of heavy duty cast iron submersible pumps are suitable for both commercial and industrial use.    These pumps can be used for pumping polluted water containing fibrous bodies.           It is also suitable for pumping detergents, soaps, emulsifiers and is ideal for pumping clear or dirty water with small solids.    Easy to install with the special coupling device.  Complete with 2 mechanical seals contained in an inspectable oil chamber with oil sensor and includes heavy duty ball bearing motor with inbuilt overloads.                    Performance data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 100m3/h.            - Heads up to 30m.            - Fluids can contain small suspended abrasive particles and solids.            - Maximum fluid temperature: +40ºC.            - PH of fluid: 6 to 10.            - Rotational speed: 2900rpm.            - Maximum immersion depth: 20m                    Motor:          The driving motor is an asynchronous, closed squirrel cage type, designed for continuous duty.                      - With in-built thermo-amperometric protection.             - With in-built oil sensor to indicate failure of one mechanical seal               before failure of second mechanical seal.             - Class of insulation: H.            - Degree of protection: IP68.            - Maximum number of start-ups: 20 per hour.            - Cable length: 10m.                    Installation:          The pump is to be installed in an upright position for both fixed and portable plants.  Do not run your pump dry.    To prevent damage, use a rope or chain to position and retrieve your pump - never use the electric cable for this purpose.  For a typical installation see page 4 of 4 of this document.                    Caution 1:           Don't use this pump for recirculating or filtering pools, spas, etc.   While these pumps are built to a high safety standard, they are not approved for installations where people will be in the water while they are operating.        

WQ high pressure heavy duty cast iron sewage pumps

A range of WQ heavy duty, high pressure sewage pumps

Pump application:          This range of heavy duty cast iron submersible sewage pumps are suitable for both commerical and industrial use.   These pumps can be used for pumping polluted water containing raw sewage.   Fitted with a non-clogging double vane impeller able to pump large solids, maintaining pump efficiencies.   Easy to install with the special coupling device.   Complete with a Sic-Sic carbon ceramic mechanical seal contained in an oil chamber and includes a heavy duty ball bearing motor.                                Performance data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m³/ at 20ºC.            - Flow rates up to 68m3/h.            - Heads up to 43m.            - Fluids can contain up to 0.2% in volume of small suspended abrasive     particles and solids.            - Maximum rated fluid density: 1300Kg/m³            - Maximum fluid temperature: +35ºC.            - Rotational speed: 2900rpm.            - Maximum submersed depth: 10m.           Motor:          The driving motor is an asynchronous, closed squirrel cage type, designed for continuous duty.                      - With in-built thermo-amperometric protection.             - Class of insulation: B.            - Degree of protection: IP68.            - Maximum number of start-ups: 20 per hour.            - Cable length: 8m                 Installation:          The pump is to be installed in an upright position for both fixed and portable plants.  Do not run your pump dry.    To prevent damage, use a rope to position and retrieve your pump - never use the electric cable for this purpose.                   CAUTION 1:        Don't use this pump for recirculating or filtering pools, spas, etc. While these pumps are built to a high safety standard, they are not approved for installations where people will be in the water while they are operating.          

Showing 1–4 of 4 results

Top