Submersible drainage pumps

A range of sewage drainage pumps suitable for oily and abrasive liquids.

Showing 2 products

DRN drainage sewage pumps

A range of DRN drainage sewage pumps

Pump application:            This range of heavy duty cast iron submersible pumps are suitable for both domestic and commercial use.    These pumps can be used for pumping polluted water containing oily substances and fibrous bodies.           It is also suitable for pumping detergents, soaps, emulsifiers and is ideal for pumping clear or dirty water with small solids including sandy or abrasive liquids.     Easy to install with the special coupling device.  Complete with 2 mechanical seals contained in an inspectable oil chamber with oil sensor and includes heavy duty ball bearing motor with inbuilt overloads.                                 Performance data:            Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                          - Flow rates up to 120m3/h.              - Heads up to 23m.              - Fluids can contain small suspended abrasive particles and solids.              - Maximum fluid temperature: +60ºC.              - PH of fluid: 6 to 10.              - Rotational speed: 2900rpm.              - Maximum immersion depth: 20m              - Free passage of objects: 43mm for DRN300/65T, DRN400/65T and DRN550/65T.              - Free passage of objects: 56mm for DRN300/80T, DRN400/80T and DRN550/80T.                        Motor:          The driving motor is an asynchronous, closed squirrel cage type, designed for continuous duty.                      - With in-built thermo-amperometric protection.             - With in-built oil sensor to indicate failure of one mechanical seal               before failure of second mechanical seal.             - Class of insulation: H.            - Degree of protection: IP68.            - Maximum number of start-ups: 20 per hour.            - Cable length: 10m.                    Installation:          The pump is to be installed in an upright position for both fixed and portable plants.  Do not run your pump dry.    To prevent damage, use a rope or chain to position and retrieve your pump - never use the electric cable for this purpose.  For a typical installation see page 4 of 4 of this document.                    Caution 1:           Don't use this pump for recirculating or filtering pools, spas, etc.   While these pumps are built to a high safety standard, they are not approved for installations where people will be in the water while they are operating.                             Caution 2:           While these pumps are built to a high quality standard, they are also capable of pumping continuously sandy and abrasive liquids. Such liquids will reduce the operating life of any pump including these DRN pumps.           

DRP drainage sewage pumps

A range of DRP drainage pumps

Pump application:            This range of heavy duty cast iron submersible pumps are suitable for both domestic and commercial use.  These pumps can be used for pumping polluted water containing oily substances and fibrous bodies.           It is also suitable for pumping detergents, soaps, emulsifiers and is ideal for pumping clear or dirty water with small solids including sandy or abrasive liquids.     Easy to install with the special coupling device.  Complete with 3 mechanical seals contained in an inspectable oil chamber and includes heavy duty ball bearing motor with inbuilt overloads.                        Performance data:            Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                          - Flow rates up to 144m3/h.              - Heads up to 24m.              - Fluids can contain small suspended abrasive particles and solids.              - Maximum fluid temperature: +40ºC.              - PH of fluid: 6 to 10.              - Rotational speed: 2900rpm.              - Maximum immersion depth: 20m              - Free passage of objects: 43mm for DRP300/65T, DRP400/65T and DRP550/65T.  - Free passage of objects: 56mm for DRP300/80T, DRP400/80T and DRP550/80T.  - Free passage of objects: 63mm for DRP750/80T.                        Motor:          The driving motor is an asynchronous, closed squirrel cage type, designed for continuous duty.                      - With in-built thermo-amperometric protection.             - Class of insulation: H.            - Degree of protection: IP68.            - Maximum number of start-ups: 20 per hour.            - Cable length: 10m.                    Installation:          The pump is to be installed in an upright position for both fixed and portable plants.  Do not run your pump dry.    To prevent damage, use a rope or chain to position and retrieve your pump - never use the electric cable for this purpose.  For a typical installation see page 4 of 4 of this document.                    Caution 1:           Don't use this pump for recirculating or filtering pools, spas, etc.   While these pumps are built to a high safety standard, they are not approved for installations where people will be in the water while they are operating.                               Caution 2:           While these pumps are built to a high quality standard, they are also capable of pumping continuously sandy and abrasive liquids. Such liquids will reduce the operating life of any pump including these DRP pumps.           

Showing 1–2 of 2 results

Top