ISO Standard centrifugal pumps Pump Application:          These are bare shaft single stage centrifugal pumps designed and manufactured to ISO Standard 2858.   A heavy duty cast iron body that contains a cast iron or bronze  impeller attached to a stainless steel shaft.    These quality pumps, have been designed for use in commercial, industrial and farming applications.   Because of the high quality of the materials and due to the accurate manufacturing processes used, these pumps are extremely reliable, quiet and long lasting.    These pumps are ideal for pressurisation, transfer of fluids, water supply, irrigation, mechanical services and for all those applications that need medium heads and flow rates.                    Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 59 liters/sec.            - Heads up to 166m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +45ºC.            - Maximum ambient temperature: +40ºC.            - Maximum allowable pressure in casing: 16 Bar.            - Rotational speed: Variable speed options.            - Heavy duty cast iron construction with stainless steel shaft and fasteners,               available with cast iron or zinc free bronze impellers.            - All pumps are fitted with a low maintenance Carbon Ceramic mechanical seal,               other seals available for higher temperature ratings and more aggressive liquids.                          Designed, manufactured and tested to the latest International and Australian standards.  IEC34, IEC72, AS1359 and QA to ISO9001.            - Protection: Frame sizes D160 and larger are fitted with PTC thermistor protection.             - Degree of protection: IP55.            - Class of insulation: F - service: S1.                    Installation:        The pump is to be installed in a fixed horizontal or vertical position.  

ISO Standard centrifugal pumps Pump Application:          These are bare shaft single stage centrifugal pumps designed and manufactured to ISO Standard 2858.   A heavy duty cast iron body that contains a cast iron or bronze  impeller attached to a stainless steel shaft.    These quality pumps, have been designed for use in commercial, industrial and farming applications.   Because of the high quality of the materials and due to the accurate manufacturing processes used, these pumps are extremely reliable, quiet and long lasting.    These pumps are ideal for pressurisation, transfer of fluids, water supply, irrigation, mechanical services and for all those applications that need medium heads and flow rates.                    Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 117 liters/sec.            - Heads up to 173m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +45ºC.            - Maximum ambient temperature: +40ºC.            - Maximum allowable pressure in casing: 16 Bar.            - Rotational speed: Variable speed options.            - Heavy duty cast iron construction with stainless steel shaft and fasteners,               available with cast iron or zinc free bronze impellers.            - All pumps are fitted with a low maintenance Carbon Ceramic mechanical seal,               other seals available for higher temperature ratings and more aggressive liquids.                          Designed, manufactured and tested to the latest International and Australian standards.  IEC34, IEC72, AS1359 and QA to ISO9001.            - Protection: Frame sizes D160 and larger are fitted with PTC thermistor protection.             - Degree of protection: IP55.            - Class of insulation: F - service: S1.                    Installation:        The pump is to be installed in a fixed horizontal or vertical position.  

ISO Standard centrifugal pumps Pump Application:          These are bare shaft single stage centrifugal pumps designed and manufactured to ISO Standard 2858.   A heavy duty cast iron body that contains a cast iron or bronze  impeller attached to a stainless steel shaft.    These quality pumps, have been designed for use in commercial, industrial and farming applications.   Because of the high quality of the materials and due to the accurate manufacturing processes used, these pumps are extremely reliable, quiet and long lasting.    These pumps are ideal for pressurisation, transfer of fluids, water supply, irrigation, mechanical services and for all those applications that need medium heads and flow rates.                    Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 180 liters/sec.            - Heads up to 120m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +45ºC.            - Maximum ambient temperature: +40ºC.            - Maximum allowable pressure in casing: 16 Bar.            - Rotational speed: Variable speed options.            - Heavy duty cast iron construction with stainless steel shaft and fasteners,               available with cast iron or zinc free bronze impellers.            - All pumps are fitted with a low maintenance Carbon Ceramic mechanical seal,               other seals available for higher temperature ratings and more aggressive liquids.                          Designed, manufactured and tested to the latest International and Australian standards.  IEC34, IEC72, AS1359 and QA to ISO9001.            - Protection: Frame sizes D160 and larger are fitted with PTC thermistor protection.             - Degree of protection: IP55.            - Class of insulation: F - service: S1.                    Installation:        The pump is to be installed in a fixed horizontal or vertical position.  

ISO Standard centrifugal pumps Pump Application:          These are bare shaft single stage centrifugal pumps designed and manufactured to ISO Standard 2858.   A heavy duty cast iron body that contains a cast iron or bronze  impeller attached to a stainless steel shaft.    These quality pumps, have been designed for use in commercial, industrial and farming applications.   Because of the high quality of the materials and due to the accurate manufacturing processes used, these pumps are extremely reliable, quiet and long lasting.    These pumps are ideal for pressurisation, transfer of fluids, water supply, irrigation, mechanical services and for all those applications that need medium heads and flow rates.                    Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 188 liters/sec.            - Heads up to 56.5m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +45ºC.            - Maximum ambient temperature: +40ºC.            - Maximum allowable pressure in casing: 16 Bar.            - Rotational speed: Variable speed options.            - Heavy duty cast iron construction with stainless steel shaft and fasteners,               available with cast iron or zinc free bronze impellers.            - All pumps are fitted with a low maintenance Carbon Ceramic mechanical seal,               other seals available for higher temperature ratings and more aggressive liquids.                          Designed, manufactured and tested to the latest International and Australian standards.  IEC34, IEC72, AS1359 and QA to ISO9001.            - Protection: Frame sizes D160 and larger are fitted with PTC thermistor protection.             - Degree of protection: IP55.            - Class of insulation: F - service: S1.                    Installation:        The pump is to be installed in a fixed horizontal or vertical position.  

ISO Standard centrifugal pumps Pump Application:          These are bare shaft single stage centrifugal pumps designed and manufactured to ISO Standard 2858.   A heavy duty cast iron body that contains a cast iron or bronze  impeller attached to a stainless steel shaft.    These quality pumps, have been designed for use in commercial, industrial and farming applications.   Because of the high quality of the materials and due to the accurate manufacturing processes used, these pumps are extremely reliable, quiet and long lasting.    These pumps are ideal for pressurisation, transfer of fluids, water supply, irrigation, mechanical services and for all those applications that need medium heads and flow rates.                    Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 310 liters/sec.            - Heads up to 54m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +45ºC.            - Maximum ambient temperature: +40ºC.            - Maximum allowable pressure in casing: 16 Bar.            - Rotational speed: Variable speed options.            - Heavy duty cast iron construction with stainless steel shaft and fasteners,               available with cast iron or zinc free bronze impellers.            - All pumps are fitted with a low maintenance Carbon Ceramic mechanical seal,               other seals available for higher temperature ratings and more aggressive liquids.                          Designed, manufactured and tested to the latest International and Australian standards.  IEC34, IEC72, AS1359 and QA to ISO9001.            - Protection: Frame sizes D160 and larger are fitted with PTC thermistor protection.             - Degree of protection: IP55.            - Class of insulation: F - service: S1.                    Installation:        The pump is to be installed in a fixed horizontal or vertical position.