Magnetic drive centrifugal pumps Pump Application:          Magnetically driven pumps handle products where leak free transfer is a must, where high reliability is paramount and the purity of the pumped medium must be maintained.      The operation is identical to any centrifugal pump except that the need for a shaft seal is eliminated.                        Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 520 Litres per minute.            - Heads up to 31m.            - Maximum suction head up to 7m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +85ºC.            - Minimum fluid temperature: -20ºC.            - Maximum ambient temperature: +40ºC.                     - Rotational speed: 2900rpm.           Motor:          The driving motor is an asynchronous, closed squirrel cage type, with external ventilation.                      - With in-built thermo-amperometric protection and capacitor.             - Class of insulation: F - service: S1.            - Degree of protection: IP54 and IP55.                              Installation:          The pump is to be installed in a fixed horizontal.    The motor must always be placed above the pump.                    

Principal Applications For applications requiring safe, leak-free, continuous flow of aggressive chemicals, acids, alkalis, sterile and chilled fluids.   Wetted Materials Standard EPDM O Ring, optional Nitrile or Viton PP encapsulated magnet, PVDF optional PP pump housing, PPS optional PPS spindle housing Alumina ceramic spindle & thrust washers   Features Manufactured in chemical resistant thermo-plastics – entirely non-metallic Magnetic couplings provide an energy efficient thermal shield, minimising heat transfer to the pumped fluids IP55 standard motor housing                  Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 117 Litres per minute.            - Heads up to 7.2m.            - Maximum suction head up to 7m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +85ºC.            - Minimum fluid temperature: -20ºC.            - Maximum ambient temperature: +40ºC.                     - Rotational speed: 2900rpm.                                        

Principal Applications For applications requiring safe, leak-free, continuous flow of aggressive chemicals, acids, alkalis, sterile and chilled fluids.   Wetted Materials Standard EPDM O Ring, optional Viton PP encapsulated magnet, PVDF optional PP pump housing, PPS optional PPS spindle housing Alumina ceramic spindle & thrust washers   Features Manufactured in chemical resistant thermo-plastics – entirely non-metallic Magnetic couplings provide an energy efficient thermal shield, minimising heat transfer to the pumped fluids IP55 standard motor housing EEXD and high SG versions available                  Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 117 Litres per minute.            - Heads up to 7.2m.            - Maximum suction head up to 7m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +85ºC.            - Minimum fluid temperature: -20ºC.            - Maximum ambient temperature: +40ºC.                     - Rotational speed: 2900rpm.                                        

Principal Applications For applications requiring safe, leak-free, continuous flow of aggressive chemicals, acids, alkalis, sterile and chilled fluids.   Wetted Materials Standard EPDM O Ring, optional Viton PP encapsulated magnet, PVDF optional PP pump housing, PPS optional PPS spindle housing Alumina ceramic spindle & thrust washers   Features Manufactured in chemical resistant thermo-plastics – entirely non-metallic Magnetic couplings provide an energy efficient thermal shield, minimising heat transfer to the pumped fluids IP55 standard motor housing EEXD and high SG versions available                  Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 158 Litres per minute.            - Heads up to 8.8m.            - Maximum suction head up to 7m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +85ºC.            - Minimum fluid temperature: -20ºC.            - Maximum ambient temperature: +40ºC.                     - Rotational speed: 2900rpm.                                        

Principal Applications For applications requiring safe, leak-free, continuous flow of aggressive chemicals, acids, alkalis, sterile and chilled fluids.   Wetted Materials Standard EPDM O Ring, optional Viton PP encapsulated magnet, PVDF optional PP pump housing, PVDF optional PPS spindle housing Alumina ceramic spindle & thrust washers   Features Manufactured in chemical resistant thermo-plastics – entirely non-metallic Magnetic couplings provide an energy efficient thermal shield, minimising heat transfer to the pumped fluids IP55 standard motor housing EEXD and high SG versions available                  Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 200 Litres per minute.            - Heads up to 10.5m.            - Maximum suction head up to 7m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +85ºC.            - Minimum fluid temperature: -20ºC.            - Maximum ambient temperature: +40ºC.                     - Rotational speed: 2900rpm.                                        

Principal Applications For applications requiring safe, leak-free, continuous flow of aggressive chemicals, acids, alkalis, sterile and chilled fluids.   Wetted Materials Standard EPDM O Ring, optional Nitrile or Viton PP encapsulated magnet PP pump body PPS spindle housing Alumina ceramic spindle   Features Manufactured in chemical resistant thermo-plastics – entirely non-metallic Magnetic couplings provide an energy efficient thermal shield, minimising heat transfer to the pumped fluid IPX5 standard motor housing Deep groove ball bearings                  Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 32 Litres per minute.            - Heads up to 5.3m.            - Maximum suction head up to 7m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +85ºC.            - Minimum fluid temperature: -20ºC.            - Maximum ambient temperature: +40ºC.                     - Rotational speed: 2900rpm.                                   

Principal Applications For applications requiring safe, leak-free, continuous flow of aggressive chemicals, acids, alkalis, sterile and chilled fluids.   Wetted Materials Standard EPDM O Ring, optional Viton PP encapsulated magnet, PVDF optional PP pump housing, PVDF optional PPS spindle housing Alumina ceramic spindle & thrust washers   Features Manufactured in chemical resistant thermo-plastics – entirely non-metallic Magnetic couplings provide an energy efficient thermal shield, minimising heat transfer to the pumped fluids IP55 standard motor housing EEXD and high SG versions available                  Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 350 Litres per minute.            - Heads up to 121m.            - Maximum suction head up to 7m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +85ºC.            - Minimum fluid temperature: -20ºC.            - Maximum ambient temperature: +40ºC.                     - Rotational speed: 2900rpm.                                        

Principal Applications For applications requiring safe, leak-free, continuous flow of aggressive chemicals, acids, alkalis, sterile and chilled fluids.   Wetted Materials Standard EPDM O Ring, optional Nitrile or Viton PP encapsulated magnet PP pump body PPS spindle housing Alumina ceramic spindle   Features Manufactured in chemical resistant thermo-plastics – entirely non-metallic.   Pump head can be connected in series for high head applications.    Can also pump two dissimilar fluids simultaneously. Magnetic couplings provide an energy efficient thermal shield, minimising heat transfer to the pumped fluid. IP54 standard motor housing, IP55 version available. Deep groove ball bearings.                  Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 50 Litres per minute.            - Heads up to 11m.            - Maximum suction head up to 7m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +85ºC.            - Minimum fluid temperature: -20ºC.            - Maximum ambient temperature: +40ºC.                     - Rotational speed: 2900rpm.                                         

Principal Applications For applications requiring safe, leak-free, continuous flow of aggressive chemicals, acids, alkalis, sterile and chilled fluids.   Wetted Materials Ceramic spindle EPDM ‘O’ ring PP/PPS pump housing Alumina ceramic graflon loaded PTFE thrust washer   Features Manufactured in chemical resistant thermo-plastics – entirely non-metallic Magnetic couplings provide an energy efficient thermal shield, minimising heat transfer to the pumped fluids Variable pump body orientation Compatible with standard pushfit fittings IP55 standard motor housing                  Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 61.5 Litres per minute.            - Heads up to 31m.            - Maximum suction head up to 7m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +85ºC.            - Minimum fluid temperature: -20ºC.            - Maximum ambient temperature: +40ºC.                     - Rotational speed: 2900rpm.                                        

Principal Applications For applications requiring safe, leak-free, continuous flow of aggressive chemicals, acids, alkalis, sterile and chilled fluids.   Wetted Materials Standard EPDM O Ring, optional Viton PP encapsulated magnet, PVDF optional PP pump housing, PVDF optional PPS spindle housing Alumina ceramic spindle & thrust washers   Features Manufactured in chemical resistant thermo-plastics – entirely non-metallic Magnetic couplings provide an energy efficient thermal shield, minimising heat transfer to the pumped fluids IP55 standard motor housing EEXD and high SG versions available                  Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 525 Litres per minute.            - Heads up to 21.7m.            - Maximum suction head up to 7m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +85ºC.            - Minimum fluid temperature: -20ºC.            - Maximum ambient temperature: +40ºC.                     - Rotational speed: 2900rpm.                                        

Principal Applications For applications requiring safe, leak-free, continuous flow of aggressive chemicals, acids, alkalis, sterile and chilled fluids.   Wetted Materials Standard EPDM O Ring, optional Nitrile or Viton PP encapsulated magnet, PVDF optional PP pump housing, PVDF optional PPS spindle housing, PVDF optional Alumina ceramic spindle All PPS version available for high temperature/pressure applications   Features Manufactured in chemical resistant thermo-plastics – entirely non-metallic Magnetic couplings provide an energy efficient thermal shield, minimising heat transfer to the pumped fluids Variable pump body orientation Compatible with standard pushfit fittings IP55 standard motor housing                  Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 80 Litres per minute.            - Heads up to 5.5m.            - Maximum suction head up to 7m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +85ºC.            - Minimum fluid temperature: -20ºC.            - Maximum ambient temperature: +40ºC.                     - Rotational speed: 2900rpm.