Quax pumps

Showing 5 products

100mm hydraulic drive submersible pumps

A full range of Quax 100mm hydraulic drive submersible pumps

Pump application:            The Quax range of hydraulic drive submersible water pumps are manufactured in the UK and are great performers.    All pumps are available with a suitable power pack if required.  All power packs come complete with wheels and central lifting frame and forklift feet.   As standard, the power packs are fitted with a silent pack Hatz diesel engine.  Fitted on a 145 litre diesel fuel tank and a hydraulic reservoir. These pumps are ideal for draining tanks and ponds which have liquids with suspended solids.   The 100mm Quax pump is available in two models i.e. as a drainer pump with larger flows and lower head or as a high head pump with lower flows.   Both models are also available with a aluminium or a steel casing                  Performance data:           Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                        - Flow rates up to 65 L/sec (drainer).             - Heads up to 61m (high head pump.             - Fluids must be clean and free from suspended abrasive particles and solids.             - Maximum fluid temperature: +40ºC.                                                     Hydraulics:           The driving motor has a high pressure motor seal with stainless steel wear plates.             - Power pack required 35hp   - Uses biodegradable oils.              - Hydraulic flow 60 L/min             - Hydraulic working pressure 175bar.             - Maximum hydraulic pressure 240bar                      Installation:           The pump is to be installed in an upright position for both fixed and portable plants.  Do not run your pump dry.  To prevent damage, use a rope or chain to position and retrieve your pump - never use the hydraulic hose for this purpose.          

100mm hydraulic drive submersible pumps with screw type impeller

A full range of Quax 100mm hydraulic drive submersible pumps with a screw type impeller

Pump application:            The Quax range of hydraulic drive submersible water pumps are manufactured in the UK and are great performers.    All pumps are available with a suitable power pack if required.  All power packs come complete with wheels and central lifting frame and forklift feet.   As standard, the power packs are fitted with a silent pack Hatz diesel engine.  Fitted on a 145 litre diesel fuel tank and a hydraulic reservoir. These pumps are ideal for draining tanks and ponds which have liquids with suspended solids.   The 100mm Quax pump is fitted with a screw impeller for larger solids handling.   Both models are also available with a aluminium or a steel casing.                     Performance data:           Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                        - Flow rates up to 39 L/sec.            - Heads up to 45m.             - Fluids must be clean and free from suspended abrasive particles and solids.             - Maximum fluid temperature: +40ºC.     - Solids handling to 70mm.                                                   Hydraulics:           The driving motor has a high pressure motor seal with stainless steel wear plates.             - Power pack required 35hp   - Uses biodegradable oils.              - Hydraulic flow 60 L/min             - Hydraulic working pressure 175bar.             - Maximum hydraulic pressure 240bar                      Installation:           The pump is to be installed in an upright position for both fixed and portable plants.  Do not run your pump dry.  To prevent damage, use a rope or chain to position and retrieve your pump - never use the hydraulic hose for this purpose.          

150mm hydraulic drive submersible pumps

A full range of Quax 150mm hydraulic drive submersible pumps

Pump application:            The Quax range of hydraulic drive submersible water pumps are manufactured in the UK and are great performers.    All pumps are available with a suitable power pack if required.  All power packs come complete with wheels and central lifting frame and forklift feet.   As standard, the power packs are fitted with a silent pack Hatz diesel engine.  Fitted on a 145 litre diesel fuel tank and a hydraulic reservoir. These pumps are ideal for draining tanks and ponds which have liquids with suspended solids.   The 150mm Quax pump is available in two models i.e. as a drainer pump with a medium flows and head or as a the super 6 model with higher heads and flows.   Both models are also available with a aluminium or a steel casing                  Performance data:           Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                        - Flow rates up to 114 L/sec             - Heads up to 38m              - Fluids must be clean and free from suspended abrasive particles and solids.             - Maximum fluid temperature: +40ºC.                                                     Hydraulics:           The driving motor has a high pressure motor seal with stainless steel wear plates.             - Power pack required 35hp   - Uses biodegradable oils.              - Hydraulic flow 60 L/min             - Hydraulic working pressure 175bar.             - Maximum hydraulic pressure 240bar                      Installation:           The pump is to be installed in an upright position for both fixed and portable plants.  Do not run your pump dry.  To prevent damage, use a rope or chain to position and retrieve your pump - never use the hydraulic hose for this purpose.          

150mm hydraulic drive submersible pumps with screw type impeller

A full range of Quax 150mm hydraulic drive submersible pumps with a screw type impeller

Pump application:            The Quax range of hydraulic drive submersible water pumps are manufactured in the UK and are great performers.    All pumps are available with a suitable power pack if required.  All power packs come complete with wheels and central lifting frame and forklift feet.   As standard, the power packs are fitted with a silent pack Hatz diesel engine.  Fitted on a 145 litre diesel fuel tank and a hydraulic reservoir. These pumps are ideal for draining tanks and ponds which have liquids with suspended solids.   The 150mm Quax pump is fitted with a screw impeller for larger solids handling.   Both models are also available with a aluminium or a steel casing.                     Performance data:           Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                        - Flow rates up to 89 L/sec.            - Heads up to 23.5m.             - Fluids must be clean and free from suspended abrasive particles and solids.             - Maximum fluid temperature: +40ºC.     - Solids handling to 90mm.                                                   Hydraulics:           The driving motor has a high pressure motor seal with stainless steel wear plates.             - Power pack required 35hp   - Uses biodegradable oils.              - Hydraulic flow 60 L/min             - Hydraulic working pressure 175bar.             - Maximum hydraulic pressure 240bar                      Installation:           The pump is to be installed in an upright position for both fixed and portable plants.  Do not run your pump dry.  To prevent damage, use a rope or chain to position and retrieve your pump - never use the hydraulic hose for this purpose.          

50mm hydraulic drive submersible pumps

A full range of Quax 50mm hydraulic drive submersible pumps

Pump application:            The Quax range of hydraulic drive submersible water pumps are manufactured in the UK and are great performers.    All pumps are available with a suitable power pack if required.  All power packs come complete with wheels and central lifting frame and forklift feet.   As standard, the power packs are fitted with a silent pack Hatz diesel engine.  Fitted on a 145 litre diesel fuel tank and a hydraulic reservoir. These pumps are ideal for draining tanks and ponds which have liquids with suspended solids.   The 50mm Quax pump is available in two models i.e. as a drainer pump with larger flows and lower head or as a high head pump with lower flows.   Both models are also available with a aluminium or a cast iron casing                  Performance data:           Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                        - Flow rates up to 13.7 L/sec (drainer).             - Heads up to 41m (high head pump.             - Fluids must be clean and free from suspended abrasive particles and solids.             - Maximum fluid temperature: +40ºC.                                                     Hydraulics:           The driving motor has a high pressure motor seal with stainless steel wear plates.             - Uses biodegradable oils.              - Hydraulic flow 20 L/min             - Hydraulic working pressure 125bar.             - Maximum hydraulic pressure 240bar                      Installation:           The pump is to be installed in an upright position for both fixed and portable plants.  Do not run your pump dry.  To prevent damage, use a rope or chain to position and retrieve your pump - never use the hydraulic hose for this purpose.          

Showing 1–5 of 7 results

Top