Clean water pumps

Clean water submersible pumps.

A full range of clean water submersible pumps.

Showing 6 products

Plastic - GFA

Clean water submersible. Pump application:  This range of economical plastic cased submersible pumps are suitable for both domestic and light duty commercial use.Ideal for pumping clean or grey water without large solids.    Easy to install.All are equipped with float switches, mechanical seals and ball bearing motors with inbuilt overloads.  These pumps have a removable base for the easy cleaning of the impeller area.                                  Performance data:   Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 16m3/h.            - Heads up to 10.5m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +35ºC.            - Maximum ambient temperature: +40ºC.            - Rotational speed: 2900rpm.            - Maximum submersed depth: 5m.           Motor: The driving motor is an asynchronous, closed squirrel cage type, designed for continuous duty.                      - With in-built thermo-amperometric protection.             - Class of insulation: B.            - Degree of protection: IP68.            - Supplied standard with 4 meters of cable and plug.                              Installation:  The pump is to be installed in a horizontal position for both fixed and portable plants.    Do not run your pump dry.     To prevent damage, use a rope to position and retrieve your pump - never use the electric cable for this purpose                                                   

Plastic - QGP series

Clean water submersible. Pump application:          This range of economical plastic cased submersible pumps are suitable for both domestic and light duty commercial use.Ideal for pumping clean or grey water without large solids.Easy to install.All are equipped with float switches, mechanical seals and ball bearing motors with inbuilt overloads.  These pumps have a removable base, with a screw fitting, for the easy cleaning of the impeller area.                        Performance data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 13m3/h.            - Heads up to 11.5m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +35ºC.            - Maximum ambient temperature: +40ºC.            - Rotational speed: 2900rpm.            - Maximum submersed depth: 5m.           Motor:          The driving motor is an asynchronous, closed squirrel cage type, designed for continuous duty.                      - With in-built thermo-amperometric protection.             - Class of insulation: B.            - Degree of protection: IP68.            - Supplied standard with 10 meters of cable and plug.                              Installation:          The pump is to be installed in a horizontal position for both fixed and portable plants.Do not run your pump dry.To prevent damage, use a rope to position and retrieve your pump - never use the electric cable for this purpose                      

QDX-A series aluminium clean water pumps

A range of sturdy lightweight aluminium clean water pumps.

Pump Application: This range of light weight submersible pumps are suitable for both domestic and commercial use. It is suitable for pumping clear water or dirty water without solids such as from flooded basements and pits. Is not fitted with a permanent float switches however it has a mechanical seal in an oil bath for longer seal life. Optional external float switches can be provided. The pump is driven by a squirrel cage motor complete with heavy duty ball bearings and with inbuilt overloads. Light and compact for easy transport and positioning of the pump. Easy to install.   Performance Data: Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC. - Flow rates up to 40m3/h. - Heads up to 32m. - Fluids must be clean and free from suspended abrasive particles and solids. - PH of fluid: 6.5 to 8. - Maximum fluid temperature: +35ºC. - Maximum immersion depth: 5m - Rotational speed: 2900rpm. - Steel filter mesh with 5mm free passage.   Motor: The driving motor is an asynchronous, closed squirrel cage type designed for continuous duty. - Maximum number of start-ups: 20 per hour. - With in-built thermo-amperometric protection. - Class of insulation: B. - Degree of protection: IP68.     Installation: The pump is to be installed in an upright position for both fixed and portable plants. Do not run your pump dry. To prevent damage, use a rope or chain to position and retrieve your pump - never use the electric cable for this purpose.   Caution: Don't use this pump for recirculating or filtering pools, spas, etc. While these pumps are built to a high safety standard, they are not approved for installations where people will be in the water while they are operating.  

QDX-B series stainless steel clean water pumps

Pump Application: This range of light weight submersible pumps are suitable for both domestic and commercial use.   It is suitable for pumping clear water or dirty water without solids such as from flooded basement and pits.   It’s not fitted with a permanent float switches however it has a mechanical seal in an oil bath for longer seal life.   Optional external float switches can be provided.   The pump is driven by a squirrel cage motor complete with heavy duty ball bearings and with inbuilt overloads.   Light and compact for easy transport and positioning of the pump.   Easy to install.   Performance data: Performance curves are based on a kinematic viscosity value of 1mm²/s and density of 1000 Kg/m³ at 20 degree -         Flow rates up to 30m³/h -         Heads up to 32m -         Fluids must be clean and free from suspended abrasive particles and solids. -         Maximum fluid temperature: +40 degrees C -         PH of fluid: 6.5 to 8 -         Rotational speed: 2900rpm -         Maximum immersion depth: 5m -         Steel filter mesh with 5mm free passage   Motor: The driving motor is an asynchronous, closed squirrel cage type, designed for continuous duty. -         With in-built thermo-amperometric protection -         Class of insulation:B. -         Degree of protection: IP68 -         Maximum number of start-ups: 20 per hour   Installation: The pump is to be installed in an upright position for both fixed and portable.   Do not run your pump dry.   To prevent damage, use a rope or chain to position and retrieve your pump – never use the electric cable for this purpose.   Caution 1: Don’t use this pump for recirculating or filtering pools, spas, etc.   While these pumps are built to a high safety standard, they are not approved for installations where people will be in the water while they are operating.    

QXN series clean water cast iron high pressure submersible pumps

Pump Application: This range of heavy duty submersible clean water pumps is suitable for both domestic and commercial use.   It is suitable for pumping clear water or dirty water with small minor non abrasive particles.   Fitted with a high pressure impeller for high heads.   Complete with a double Sic-Sic mechanical seal contained in an oil chamber.   Because of the design, the heavy duty ball bearing motor is cooled by the pumped water, therefore this pump can be operated partially immersed.   Performance data: Performance curves are based on a kinematic viscosity value of 1mm²/s and density of 1000 Kg/m³ at 20 degree -         Flow rates up to 42m³/h -         Heads up to 59m -         Fluids must be clean and free from suspended abrasive particles and solids. -         Maximum fluid temperature: +35 degree -         PH of fluid: 6.5 to 8.5. -         Rotational speed: 2900rpm -         Maximum immersion depth: 5m   Motor: The driving motor is an asynchronous, closed squirrel cage type, designed for continuous duty. -         With in-built thermo-amperometric protection -         Class of insulation: B. -         Degree of protection: IP68 -         Maximum number of start-ups: 20 per hour -         Cooled by pumped water through motor jacket -         Cable length: 8m.   Installation: The pump is to be installed in an upright position for both fixed and portable.   Do not run your pump dry.   To prevent damage, use a rope or chain to position and retrieve your pump – never use the electric cable for this purpose.   Caution 1: Don’t use this pump for recirculating or filtering pools, spas, etc.   While these pumps are built to a high safety standard, they are not approved for installations where people will be in the water while they are operating.  

Stainless Steel - QGS series

Clean water submersible. Pump application:          This range of economical plastic cased submersible pumps are suitable for both domestic and light duty commercial use.  Ideal for pumping clean or grey water without large solids.   Easy to install.    All are equipped with float switches, mechanical seals and ball bearing motors with inbuilt overloads.  These pumps have a removable base, with a screw fitting, for the easy cleaning of the impeller area.                             Performance data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 13m3/h.            - Heads up to 12m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +35ºC.            - Maximum ambient temperature: +40ºC.            - Rotational speed: 2900rpm.            - Maximum submersed depth: 5m.           Motor:          The driving motor is an asynchronous, closed squirrel cage type, designed for continuous duty.                      - With in-built thermo-amperometric protection.             - Class of insulation: B.            - Degree of protection: IP68.            - Supplied standard with 10 meters of cable and plug.                         Installation:          The pump is to be installed in a horizontal position for both fixed and portable plants.  Do not run your pump dry.    To prevent damage, use a rope to position and retrieve your pump - never use the electric cable for this purpose                                        

Showing 1–6 of 6 results

Top