Pump application: A full range of Shakti multistage centrifugal pumps, the SH series available in 304 Stainless Steel with Cast Iron waterways or the SHI series in full 304 Stainless Steel. Also available as the SHN series in full 316 stainless steel. These horizontal multistage pumps are both powerful and efficient and constructed from non corrosive materials. These quality pumps are built to the highest standards giving the user many years of trouble free service. Fantastic pumps to deliver water in areas where medium heads are required for small to medium flows. Suitable for domestic, commercial and industrial use. Also ideal for pumping mineral water, edible vegetable oils and other low viscosity, clean non flammable and non explosive fluids. Performance data: Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC. - Flow rates up to 14m3/h. - Heads up to 58m. - Curve tolerance in conformity with ISO9906, appendix A - Maximum fluid temperature: +90ºC. - Minimum fluid temperature: 0ºC. - Maximum ambient temperature: +55ºC. - Motor protection: IP55. - Motor insulation: Insulation class H. - Rotational speed: 2900rpm. - Maximum operating pressure: 6 bar. Installation: It is recommended that these pumps be installed in a level position in a dry well ventilated location. Caution: These pumps are not self priming and require a flooded suction or a priming system including a foot valve. The operation of the pump must be restricted to the thickened section on each of the performance curves.
