Waste water pumps

Waste water pumps.

A full range of waste water submersible pumps.

Showing 7 products

DRE dirty water submersible pumps

SUB-8

A full range of DRE dirty water submersible pumps

Pump application:           This range of heavy duty cast iron submersible pumps are suitable for both domestic and commercial use.   These pumps are approved for Class1, Zone 2 use.   This means that the pumps can be used for example in underground car parks pumping water containing oily substances.      It is also suitable for pumping detergents, soaps, emulsifiers and is ideal for pumping clear water or dirty water without solids such as from flooded basements and pits.   Easy to install.  Equipped with or without float switches, complete with mechanical seals and ball bearing motors with inbuilt overloads.  available with horizontal and vertical outlet configurations.                               Performance data:           Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                        - Flow rates up to 45m3/h.             - Heads up to 18m.             - Fluids must be clean and free from suspended abrasive particles and solids.             - Maximum fluid temperature: +40ºC.             - PH of fluid: 6 to 10.             - Rotational speed: 2900rpm.             - Maximum immersion depth: 20m             - Stainless steel filter mesh with 10 x 20 mm free passage.                      Motor:           The driving motor is an asynchronous, closed squirrel cage type, designed for continuous duty.                        - With in-built thermo-amperometric protection.              - Class of insulation: F.             - Degree of protection: IP68.             - Maximum number of start-ups: 20 per hour.                      Installation:           The pump is to be installed in an upright position for both fixed and portable plants.  Do not run your pump dry.  To prevent damage, use a rope or chain to position and retrieve your pump - never use the electric cable for this purpose.  For a typical installation see page 4 of 4 of this document.                      Caution:           Don't use this pump for recirculating or filtering pools, spas, etc.   While these pumps are built to a high safety standard, they are not approved for installations where people will be in the water while they are operating.           

KBZ series heavy duty cast iron dirty water pumps

SUB-9

A range of KBZ heavy duty cast iron dirty water pumps.

Pump Application: This range of heavy duty cast iron dirty water pump is suitable for construction industry and general industrial use.    These pumps can be used for pumping liquids containing some abrasive particulars.    Ideal for mining, quarries, sewage treatment plants and general dewatering work.    Fitted with a wear resistant chromium steel semi open impeller and a ductile iron wear plate for a long and efficient life.   Easy to install with a sturdy suction hose.    Complete with a Sic-Sic carbon ceramic mechanical seal contained in an oil chamber and includes a heavy duty ball bearing motor.   Performance data: Performance curves are based on a kinematic viscosity value of 1mm²/s and density of 1000 Kg/m³ at 20 degree -         Flow rates up to 65m³/h -         Heads up to 35m -         Suitable for fluids containing suspended abrasive particles and solids -         Maximum fluid temperature: +40 degree -         PH of fluid: 6.5 to 8. -         Rotational speed: 2900rpm -         Maximum immersion depth: 50m   Motor: The driving motor is an asynchronous, closed squirrel cage type, designed for continuous duty. -         With in-built thermo-amperometric protection in motors up to 4kw. -         Class of insulation: F. -         Degree of protection: IP68 -         Maximum number of start-ups: 20 per hour -     Cable length: 8m.   Installation: The pump is best used in an upright position for maximum suction capacity, however can also be used in a horizontal position if required. The pump can be used when partially out of the water.    However do not run your pump dry – refer to the instruction manual for details.   To prevent damage, use a rope or chain to position and retrieve your pump – never use the electric cable for this purpose.   Caution 1: Don’t use this pump for recirculating or filtering pools, spas, etc.   While these pumps are built to a high safety standard, they are not approved for installations where people will be in the water while they are operating.    

Minetuff dirty water - dewatering pumps

SUB - 13

Pump Application: The Minetuff submersible dewatering pump has been designed for harsh mining & construction type environments. The pump wet end is standard polyurethane coated for extra wear protection against sand, silt and fines. A true workhorse of any underground mining operation, its design has been tried and proven. Complete with a double cemented Tungsten Carbide mechanical seal contained in an oil chamber. Because of the design, the heavy duty ball bearing motor is cooled by the pumped water, therefore this pump can be operated partially immersed.   Performance data: Performance curves are based on a kinematic viscosity value of 1mm²/s and a density of 1000 Kg/m³ at 20 degree -         Flow rates up to 225m³/h -         Heads up to 90m -         Available from 8 to 37kw -         Maximum fluid temperature: +40 degree -         PH of fluid: 5 to 8 -         Rotational speed: 2900rpm -         Maximum immersion depth: 20m   Motor: The driving motor is an asynchronous, closed squirrel cage type, designed for continuous duty. -         cooled by pumped water through motor jacket -         class of insulation: H (180deg C) -         maximum number of start-ups: 30 per hour -         Cable length: The standard pump come without any cable, when the final cable length is known, a suitable cable can be fitted and supplied by Finsbury Pump Systems.   Installation: The pump is to be installed in an upright position for both fixed and portable plants. Do not run your pump dry. To prevent damage, use a rope or chain to position and retrieve you pump – never use the electric cable for this purpose.  

Plastic - GVA

SUB-6

Pump application: This range of economical plastic cased submersible pumps are suitable for both domestic and light duty commercial use.  Ideal for pumping black or dirty water from household septic tanks.   Easy to install.    All are equipped with float switches, mechanical seals and ball bearing motors with inbuilt overloads.  These pumps have a removable base for the easy cleaning of the impeller area.      Performance data:          Performance curves are based on a kinematic viscosity value of  1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 16m3/h.            - Heads up to 9.5m.            - Efficient no clog filter.            - Maximum fluid temperature: +35ºC.            - Maximum ambient temperature: +40ºC.            - Rotational speed: 2900rpm.            - Maximum submersed depth: 5m.  Motor:          The driving motor is an asynchronous, closed squirrel cage type, designed for continuous duty.                      - With in-built thermo-amperometric protection.             - Class of insulation: B.            - Degree of protection: IP68.            - Supplied standard with 4 meters of cable and plug.                              Installation:          The pump is to be installed in a horizontal position for both fixed and portable plants.  Do not run your pump dry.    To prevent damage, use a rope to position and retrieve your pump - never use the electric cable for this purpose                                        

Plastic - QGW series

SUB-5

Dirty water submersible. Pump application:       This range of economical plastic cased submersible pumps are suitable for both domestic and light duty commercial use.  Ideal for pumping black or dirty water from household septic tanks.   Easy to install.    All are equipped with float switches, mechanical seals and ball bearing motors with inbuilt overloads.  These pumps have a removable base for the easy cleaning of the impeller area.                            Performance data:        Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 14.5m3/h.            - Heads up to 8m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +35ºC.            - Maximum ambient temperature: +40ºC.            - Rotational speed: 2900rpm.            - Maximum submersed depth: 5m.           Motor:          The driving motor is an asynchronous, closed squirrel cage type, designed for continuous duty.                      - With in-built thermo-amperometric protection.             - Class of insulation: B.            - Degree of protection: IP68.            - Supplied standard with 5 meters of cable and plug.                              Installation:          The pump is to be installed in a horizontal position for both fixed and portable plants.  Do not run your pump dry.    To prevent damage, use a rope to position and retrieve your pump - never use the electric cable for this purpose           

Stainless steel - QSW series

SUB-7

  Pump application:                   This range of stainless steel submersible pump is suitable for both domestic and commercial use.  Ideal for pumping black or dirty water from household septic tanks.   Easy to install.  All are equipped with float switches, mechanical seals and ball bearing motors with inbuilt overloads.                             Performance data:                       Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                         -      Flow rate up to 14.5m³/h                         - Heads up to 8m.   - Fluids must be clean and free from suspended abrasive particles.       - Maximum fluid temperature: +35ºC.     - Maximum ambient temperature: +40ºC.     - Supplied standard with 10 meters of cable and plug.   - Rotational speed: 2900rpm.   - Maximum submersed depth: 5m.           Installation:                     The pump is to be installed in a horizontal position for both fixed and portable plants.  Do not run your pump dry.    To prevent damage, use a rope to position and retrieve your pump - never use the electric cable for this purpose                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        

Waste water submersible pumps

SWW / CWW commander range

A full range of Commander SWW and CWW waste water submersible pumps

Pump application:            The Finsbury Pumps range of "Commander" cast iron waste water pumps are both great performers and are very affordable for all users.    Built to the same quality standards as the Commander stainless steel range.    Also fitted with double mechanical silicon carbide seals cooled in a sealed oil bath for longer life. Larger pump units are available with "Duckfeet" extraction systems. All single phase pumps are available with or without float switches.   It is also suitable for pumping detergents, soaps, emulsifiers and is ideal for pumping clear water, waste or dirty water without solids such as from flooded basements and pits.   Easy to install.                    Performance data:           Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                        - Flow rates up to 42m3/h.             - Heads up to 45m.             - Fluids must be clean and free from suspended abrasive particles and solids.             - Maximum fluid temperature: +40ºC.                    - Rotational speed: 2900rpm.             - Maximum immersion depth: 35m                           Motor:           The driving motor is an asynchronous, closed squirrel cage type, designed for continuous duty.                        - With in-built thermo-amperometric protection.              - Class of insulation: F.             - Degree of protection: IP68.             - Maximum number of start-ups: 20 per hour.                      Installation:           The pump is to be installed in an upright position for both fixed and portable plants.  Do not run your pump dry.  To prevent damage, use a rope or chain to position and retrieve your pump - never use the electric cable for this purpose.              Caution:           Don't use this pump for recirculating or filtering pools, spas, etc.   While these pumps are built to a high safety standard, they are not approved for installations where people will be in the water while they are operating.           

    Showing 1–7 of 7 results

    Top