Water transfer pumps

Showing 5 products

1 inch Transfer pumps + Watermovers

Pump application:Light weight volume pump with 22m head and flow ups to 116L/min.   These small water movers are designed for shifting small to medium quantities of water. with rapid self priming capabilities and made to last with the help of solid and durable cast impeller and internal casing.   Compact and complete with petrol drive that is easily maintained for a long service life.   Complete in a sturdy handle for ease of handling. Performance data:Performance curves are based on a kinematic viscosity value of 1mm²/s and a density of 1000Kg/m³  at 20ºC.  - Flow rates up to 7m³/h.  - Heads up to 22m.  - Suction heads up to 8m.  - Fluid must be clean and free from suspended abrasive particles.  - Maximum fluid temperature: +35ºC.  - Maximum ambient temperature: +40ºC.  - Maximum allowable pressure in casing: 6 Bar.  - Rotational speed: Norminal speed 3000rpm, maximum speed 7000rpm  - 25mm inlet and discharge ports. Engine:  - Model FWP25HTV-2 Powered by an air-cooled 2   stroke petrol engine  - Model FWP25HTV-4 Powered by an air-cooled 4 stroke petrol engine Installation: The pump is to be installed in a horizontal position for both fixed and portable plants. These self priming pumps require water in the pump case only for the initials pumping operation. No water is necessary for subsequent pumping when the casing contains water For maximum efficiency make the piping as short and straight as possible.  Caution: These pumps should never be run dry!

2 and 3 inch Bareshaft Water Movers

Pump application: Large volume pumps with medium head available with a standard or a corrosion proof plastic body. These water movers are designed for heavy duty and are suitable for construction and industrial work. With rapid Self priming capabilities and made to trasfer high volumes of water. These pumps can be operate with a range of variable speeds to give a large range of pump duties.

2 and 3 inch Finsbury Plastic Body watermovers

Pump application:Large volume pumps available in two sizes, both with medium heads manufactured with a corrosion proof plastic body. These watermovers are designed for heavy duty and are suitable for construction and industrial work. With rapid self priming capabilities and made to transfer high volumes of water with the help of a solid and durable impeller and internal casing. Compact and complete with a variety of petrol and diesel drives that are easily maintained for a long service life. Optionally enclosed in a sturdy roll cage for protection and ease of handling. Performance data:Performance curves are based on a kinematic viscosity value of 1mm²/s and a density of 1000Kg/m³  at 20ºC.  - Flow rates up to 83m³/h.  - Heads up to 38m.  - Suction heads up to 8m.  - Fluid must be clean and free from suspended abrasive particles.  - Maximum fluid temperature: +35ºC.  - Maximum ambient temperature: +40ºC.  - Maximum allowable pressure in casing: 6 Bar.  - Rotational speed: Norminal speed 3000rpm, maximum speed 3600rpm  - Available with either 50 or 80mm inlet and discharge ports.  - Available with or without a roll cage. Engine:Engine options available are in diesel and petrol from the following manufactures.Honda Petrol: 6.5hp OHV horizontal shaft petrol engines with electronic ignition and oil alert.Subaru Petrol: 7hp OHV horizontal shaft petrol engines, with electronic ignition and oil alert.Subaru Diesel: 5.5hp air-cooled direct fuel injected diesel engines, with low vibration levels. Installation:The pump is to be installed in a horizontal position for both fixed and portable plants. These self priming pumps require water in the pump case only for the initial pumping operation. No water is necessary for subsequent pumping when the casing contains water For maximum efficiency make the piping as short and straight as possible.  Caution: These pumps should never be run dry!

2, 3 and 4 inch Watermovers

Engine pumps Pump Application:           Large volume pumps with medium head available in three popular sizes.  These water movers are designed for heavy duty and are suitable for construction and industrial work.   With rapid self priming capabilities and made to  transfer high volumes of water with the help of solid and durable cast iron impeller and internal casing.   Compact and complete with a variety of diesel or petrol drive units that are easily maintained for a long service life.   Enclosed in a sturdy roll cage for protection and ease of handling.                                Performance Data:          Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.                      - Flow rates up to 73m3/h.            - Heads up to 42m.            - Suction heads up to 8m.            - Fluids must be clean and free from suspended abrasive particles.            - Maximum fluid temperature: +35ºC.            - Maximum ambient temperature: +40ºC.            - Maximum allowable pressure in casing: 6 Bar.            - Rotational speed: Nominal speed 3000rpm, maximum speed 3600rpm.            - Electronic start units available upon request.            - Available in 3 different flow / head configurations.                    Engine:          Engine options available are in diesel and petrol from the following manufacturers.          Honda petrol: 5.5 to 9hp OHV horizontal shaft petrol engines with electronic ignition and oil alert.                     Subaru petrol: 6 to 9hp OHV horizontal shaft petrol engines, with electronic ignition and oil alert.          Subaru diesel: 5.5 to 8.5hp air-cooled direct fuel injected diesel engines, with low vibration levels.                       Installation:           The pump is to be installed in a horizontal position for both fixed and portable plants.   These self priming pumps require water in the pump case only for the initial pumping operation.   No water is necessary for subsequent pumping when the casing contains water   For maximum efficiency make the piping as short and straight as possible.             Caution: These pumps should never be run dry!                                                    

6 inch heavy duty watermover

Pump Application: Our largest water transfer pumps which delivering up to an amazing 50 l/sec.   These water movers are designed for heavy duty and are suitable for serious construction and industrial work.    With self priming capabilities and made to transfer high volumes of water with the help of solid and durable marine grade casing and internals and a cast iron impeller.    Compact and available with either a diesel or petrol drive unit that is easily maintained for a long service life.    Enclosed in a sturdy heavy duty roll cage for protection and ease of handling.   Performance data: Performance curves are based on a kinematic viscosity value of 1mm²/s and a density of 1000Kg/m³ at 20ºC. -          flow rates up to 174m³/h -          Heads up to 20m -          Suction heads up to 7.4m -          With large open impellers capable of pumping some solids in suspension. -          Maximum fluid temperature: +35ºC -          Maximum ambient temperature: +40ºC -          Maximum allowable pressure in casing: 6 Bar -          Rotational speed: Nominal speed 3000rpm, maximum speed 3600rpm -          Electronic start units are supplied as standard   Engine: Engine options available are in diesel and petrol from the following manufacturers. Honda petrol: 13hp OHV horizontal shaft petrol engines with electronic ignition and oil alert Subaru diesel: 8.5hp air-cooled direct fuel injected diesel engines, with low vibration levels.   Installation: The pump is to be installed in a horizontal position for both fixed and portable plants.   These self priming pumps require water in the pump case only for the initial pumping operation.      No water is necessary for subsequent pumping when the casing contains water. For maximum efficiency make the piping as short and straight as possible.    

Showing 1–5 of 10 results

Top