100mm hydraulic drive submersible pumps with screw type impeller
The Quax range of hydraulic drive submersible water pumps are manufactured in the UK and are great performers.
All pumps are available with a suitable power pack if required. All power packs come complete with wheels and central lifting frame and forklift feet. As standard, the power packs are fitted with a silent pack Hatz diesel engine. Fitted on a 145 litre diesel fuel tank and a hydraulic reservoir.
These pumps are ideal for draining tanks and ponds which have liquids with suspended solids.
The 100mm Quax pump is fitted with a screw impeller for larger solids handling. Both models are also available with a aluminium or a steel casing.
Performance data: Performance curves are based on a kinematic viscosity value of 1mm2/s and a density of 1000 Kg/m3 at 20ºC.
- Flow rates up to 39 L/sec. - Heads up to 45m. - Fluids must be clean and free from suspended abrasive particles and solids. - Maximum fluid temperature: +40ºC.
- Solids handling to 70mm.
Hydraulics: The driving motor has a high pressure motor seal with stainless steel wear plates. - Power pack required 35hp
- Uses biodegradable oils. - Hydraulic flow 60 L/min - Hydraulic working pressure 175bar. - Maximum hydraulic pressure 240bar
Installation: The pump is to be installed in an upright position for both fixed and portable plants. Do not run your pump dry. To prevent damage, use a rope or chain to position and retrieve your pump - never use the hydraulic hose for this purpose.